MAGNETGLAZE PRO combines the simplicity of the magnetic fixing with the
aesthetic appeal of framing your plastic sheet. 
It comprises two parts, a rigid pvc frame profile which has the magnetic strip attached and a self-adhesive metal strip. A length of
mitre beading is also supplied to assist you in cutting neat,
accurate corners. This system is particularly suitable for
windows requiring quick or repeated removal.
MAGNETGLAZE PRO is available in a 2.44m lengths and white or brown in colour

Measuring up for your MAGNETGLAZE PRO

3. You will require 2 lengths at measurement 'A' plus 33mm and 2 lengths at
measurement 'B' plus 33mm for your window. Add these together to find out
how many 2.44m lengths you will need.

USING MAGNETGLAZE PRO STEP BY STEP

4. Remove the white metal strip from the length of Magnetglaze PRO. 5. Working with your plastic panel, measure the side to which you want to place a strip of Magnetglaze PRO. Add 3mm to this and squarely cut a length of Magnetglaze PRO to suit. Repeat for each side of the panel. 6. Using the outer corner as a reference (see diagram), insert the mitre bead and cut a 45° mitre using the fine toothed saw and mitre block. Repeat this step for all lengths.  7. Now fit the Magnetglaze PRO to the edges of the panel. 8. Hold the panel to the window frame so that it overlaps equally on each edge. 9. Draw a pencil line around the sheet on the frame. 10. Cut and fit the white metal strip to the window frame, sticking it just inside the pencil marks. 11. Offer up the glazing panel to the window and click into place.