Acrylic Cleaner 4L Tin
larger imageMove mouse over the image to magnify
 

ATA-Cleaner

ATA-Cleaner

Acrylic Cleaner 4L Tin

Acrylic Cleaner 4L Tin
NZ $147.80
excl GST
Qty.
Cleaner for Acrylic 4 Litre Tin
It shows good results with other plastic materials such as Polycarb, ABS and HIPS. 
 

Contains

PETROLEUM DISTILLATES, N.O.S.
UN number 1268
Class 3
Packing group II
Hazchem Code 3[Y]E

Instructions

Apply to a clean cleaning cloth and wipe gently. Change cloth sides to avoid scratching the surface If scratched use XERAPOL® scratch removal. Use ACRI-BOND MASKREM cleaner for masking tape and paper residue removal and BRILLIANIZE® antistatic polisher for finishing touch.

Recommended use

This cleaner has been designed for cleaning of Acrylic. It shows good results with other plastic materials such as Polycarb, ABS and HIPS. Test before use.

Warranty

This product is intended for use by skilled individuals at their own risk. Since specific use, materials and handling is not controlled by ATA, our warranty is limited to the replacement of defective products only.

Risk - R11, 38, 48/20, 62, 65, 67, 51/53

Chemical used in this cleaner is highly flammable and irritating to skin. There is a danger of serious damage to health by prolonged exposure through inhalation. Vapours may cause drowsiness and dizziness.

Safety - S9, 16, 23, 61, 62, 2

Keep container in a well-ventilated place. Keep away from sources of ignition - No smoking. Do not breathe vapour. Adequate explosion-proof ventilation to control airborne concentrations. Avoid release to the environment. Refer to instructions/Safety data sheets. If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.

First Aid

Remove to fresh air. If rapid recovery does not occur, transport to nearest medical facility for additional treatment. Remove contaminated clothing. Flush exposed area with water If swallowed, do not induce vomiting.

Spills/leaks

Recover or recycle if possible. Drain container thoroughly. After draining, vent in a safe place away from sparks and fire. Allow residues to evaporate or soak up with an appropriate absorbent material and dispose of safely. Remove contaminated soil and dispose of safely.

Fire

Carbon monoxide may be evolved if incomplete combustion occurs. Use foam, water spray or fog. Dry chemical powder, carbon dioxide, sand or earth may be used for small fires only. Do not use water in a jet.

ADDITIONAL INFORMATION IS LISTED IN THE MATERIAL SAFETY DATA SHEET

You might also be interested in ...

Plexus Plastic Cleaner 368g Can
NZ $48.20
excl GST
Brillianize 4 litre Polish

Brillianize 4 litre Polish

ATA-Brillianize-4L
NZ $180.00
excl GST
AcriBond Masking Remover 0.5 Litre Tin
NZ $35.00
excl GST

EMAIL UPDATES

Sign up to our quarterly newsletter, enter your email below. Learn more
Email*
 
EXTREMELY HAPPY WITH THE END PRODUCT. IT IS MADE VERY PROFESSIONALLY AND IS EXACTLY WHAT WE WERE LOOKING FOR
Nathan, Christchurch