105 Acribond 100mL Bottle
larger imageMove mouse over the image to magnify
 

ATA-105-100ML

ATA-105-100ML

105 Acribond 100mL Bottle

105 Acribond 100mL Bottle
NZ $29.00
excl GST
Qty.
105 Acribond 100mL Bottle Thin Acrylic (Class 6)
 

Contains

U.N. 1593 METHYLENE CHLORIDE CAS No. 75-09-2
U.N. 1710 TRICHLOROETHYLENE STABILIZED CAS No. 79-01-6
U.N. 1247 METHYL METHACRYLATE MONOMER CAS No. 80-62-6
PG III
HAZCHEM CODE 2Z
Class 6.1

Instructions

Parts to be joined should fit without forcing and be clean. Apply adhesive with suitable applicator and assemble while parts are still wet. Press parts together in firm contact. ACRI- BOND 105 forms initial bond very quickly. Strength develops rapidly reaching full strength in 24 to 48 hours leaving no dry residue.

Recommended use

This adhesive has been design for bonding Acrylic to Acrylic. Also, shows good results bonding Polycarbonate, HIPS, ABS and PETG to itself. Test before use for mixed or other plastic material combinations.

Warranty

This product is intended for use by skilled individuals at their own risk. Since specific use, materials and handling are not controlled by ATA, our warranty is limited to the replacement of defective products only.

Risk - R 40(3), 43, 45(2), 36/37/38, 52, 53

Methylene Chloride has been shown to cause cancer in laboratory animals. Risk to your health depends on level and duration of exposure. Irritating to eyes and skin. Repeated exposure may cause skin dryness and cracking. Vapour may cause drowsiness and dizziness.

Safety - S 23, 36/37, 61

Do not breathe vapour. Wear suitable protective clothing and gloves. Avoid release in environment. Keep container in a well ventilated place. Keep away from sources of ignition – No smoking. Avoid contact with eyes.

First Aid

If swallowed, do NOT induce vomiting. If in eyes, hold eyes open, food with water for at least 15 minutes and see a doctor. If skin contact occurs, soak contaminated clothing with water and then remove. Wash skin with soap and water. If inhaled, remove from contaminated area. For advice contact a Poisons Information Centre in Australia 131 126 or a doctor.

Spills/leaks

Don protective equipment including respirator. Contain spilled material to prevent it entering drains. Absorb on sand, earth or other inert absorbent and place in properly labelled sealed containers for disposal.

Fire

The product will decompose in a fire giving all toxic fumes. In case of fire use water fog foam, dry chemical or carbon dioxide. Cool tank/container with water spray.

ADDITIONAL INFORMATION IS LISTED IN THE MATERIAL SAFETY DATA SHEET

ATA105 Selection Chart

 

You might also be interested in ...

105 Acribond 4.0L Tin
NZ $261.00
excl GST

EMAIL UPDATES

Sign up to our quarterly newsletter, enter your email below. Learn more
Email*
 
EXTREMELY HAPPY WITH THE END PRODUCT. IT IS MADE VERY PROFESSIONALLY AND IS EXACTLY WHAT WE WERE LOOKING FOR
Nathan, Christchurch