Sash Window double glazing

Home Home Improvment EASYFIX DIY DOUBLE GLAZING SYSTEM Sash Window double glazing

There are several solutions to sash windows.Download PDF logo smallClick for Installation Instructions


easyfix trackglaze vertical eleaflet pdf

Trackglaze Vertical is a DIY sliding insulation system, for heat loss and noise protection. When the two panes are closed, bristle seal insulates within both tracks and across the visible joint. Handles clip onto the top and bottom of both panes and Stop Strips fix onto the track edges propping the panes open or raised, or stopping them opening. The system works best with 4.5mm Polycarbonate glazing sheet, as it is tougher than acrylic, and glass should never be used with it. Based on your measurements, the panes can meet at a height to align with the outer window. This is particularly useful for sash windows, allowing access to the centre locking mechanism before opening either top or bottom pane for ventilation. Full details of how to use, measure and install Trackglaze Vertical are in the PDF alongside.


trackglaze vertical sliding secondary glazing
The design of the system needs to be understood before purchasing, because there are no failsafes or counterweights (apart from friction of the bristles within the side tracks) to prevent a large pane falling under its own weight, if not held when being moved or propped correctly when not. Where the windows are accessed by children, for example, this might not be suitable, so we suggest looking at our other Easyfix insulating systems if so, but Trackglaze Vertical remains perfectly safe if used as designed. For example, see our sideways sliding system Trackglaze Horizontal details.

magnetglaze conversion angles
The other consideration is that Trackglaze Vertical needs to be fitted within a cavity, in order to support the movement and weight of the panes. Because most sash windows are not made with such a cavity it will need to be made with wooden battens on the window surround, or by using Window Conversion Angles.These are 3mm thick 25mm Angles that can be fixed and mitred to create the cavity, available in small or bulk packs, white or brown. These can be bought from this page - details in the PDF alongside.

Kits are available in bulk packs of 3 or singly. Each kit can insulate a window of up to 2m height and 1.2m width, and contains:

  • 2 x 2m adhesive Tracks (for the sides)
  • 2 x 1.2m adhesive Tracks (for top and bottom)
  • 4 x 1.2m push fit Handles (for top and bottom of each pane)
  • 4 x 2m push fit Stop Strips (for propping panes at suitable heights)
  • 1 x 12m coil adhesive Bristle Seal (providing insulation when panes closed)
  • 3 x Surface Preparation Wipes (to degrease surfaces before adhesion)

The Double Tracks are 19mm wide, with handles protruding about 6mm further, to be borne in mind for the depth of cavity needed.

Sash window


In order to assist us in reducing spam, please type the characters you see: