or 6 weekly interest-free payments from
NZ $6.83
or 6 weekly interest-free payments with an initial payment of
NZ $6.83
and weekly payments of NZ $6.83What's this?
Receive your purchase now, spread the total cost over 6 weekly automatic payments. Interest free!
Simply select Laybuy as your payment method at checkout
Login or Register for Laybuy and complete your order in seconds
Complete your purchase using an existing debit or credit card
Pay over 6 weeks and receive your purchase now
ACRI-BOND 105 is very fast curing water thin, clear solvent cement ideal for joining uncross-linked cast and extruded acrylic, polycarb and ABS. It is also suitable for many other applications as shown on the chart. It provides instant initial bonding which makes it ideal for making T-bonds and bonding of narrow areas of all kinds. Recommended application can be brush, syringe or needle applicator.
Contains
METHYLENE CHLORIDE > 60% TRICHLOROETHYLENE < 10%
Instructions
Parts to be joined should fit without forcing and be clean. Apply adhesive with suitable applicator and assemble while parts are still wet. Press parts together in firm contact. ACRI-BOND 105 forms initial bond very quickly. Strength develops rapidly reaching full strength in 24 to 48 hours leaving no dry residue.
Recommended use
This adhesive has been design for bonding Acrylic to Acrylic. Also, shows good results bonding Polycarbonate, HIPS, ABS and PETG to itself. Test before use for mixed or other plastic material combinations.
Selection Chart
Mixing charts
ACRI-BOND 105 mixed with ACRI-BOND 125
Adding “body” to water-thin solvent for smoother flow and improves “gap filling”. When dry it will leave 7%, 15% or 20% clear acrylic resin.
ACRI-BOND 105 mixed with ACRI-BOND 110
Adding “body” to water-thin solvent for smoother flow and improves “gap filling”. Slows evaporation of AB105 and improves penetration. When dry it will leave 7%, 15% or 20% clear acrylic resin.
It is also suitable for many other applications as shown on the chart. It provides instant initial bonding which makes it ideal for making T-bonds and bonding of narrow areas of all kinds. Recommended application can be brush, syringe or needle applicator.
Contains
METHYLENE CHLORIDE > 60%
TRICHLOROETHYLENE < 10%
Instructions
Parts to be joined should fit without forcing and be clean. Apply adhesive with suitable applicator and assemble while parts are still wet. Press parts together in firm contact. ACRI-BOND 105 forms initial bond very quickly. Strength develops rapidly reaching full strength in 24 to 48 hours leaving no dry residue.
Recommended use
This adhesive has been design for bonding Acrylic to Acrylic. Also, shows good results bonding Polycarbonate, HIPS, ABS and PETG to itself. Test before use for mixed or other plastic material combinations.
Selection Chart
Mixing charts
ACRI-BOND 105 mixed with ACRI-BOND 125
Adding “body” to water-thin solvent for smoother flow and improves “gap filling”. When dry it will leave 7%, 15% or 20% clear acrylic resin.
ACRI-BOND 105 mixed with ACRI-BOND 110
Adding “body” to water-thin solvent for smoother flow and improves “gap filling”. Slows evaporation of AB105 and improves penetration. When dry it will leave 7%, 15% or 20% clear acrylic resin.
SDS