120 Acribond 4.0L Tin ABS, HIPS, PVC, PETG (Class 3)
U.N. 1193 METHYL ETHYL KETONE CAS No. 78-93-3 U.N. 2056 TETRAHYDROFURAN CAS No.109-99-9 PG II HAZCHEM CODE 2 (Y) E Class 3
Parts to be joined should fit without forcing and be clean. Apply adhesive with suitable applicator and assemble while parts are still wet. Press parts together in firm contact. ACRI-BOND 120 forms initial bond very quickly. Strength develops rapidly reaching full strength in 24 to 48 hours leaving no dry residue.
This adhesive has been design for bonding ABS, HIPS, PVC and PETG to itself. Also, shows good results bonding Acrylic to Polycarbonate, HIPS, ABS and PVC to itself. Test before use for other combinations.
This product is intended for use by skilled individuals at their own risk. Since specific use, materials and handling are not controlled by ATA, our warranty is limited to the replacement of defective products only.
Risk - R11, 19, 36, 37
This solvent cement is highly flammable. May form explosive peroxides. Irritating to eyes and respiratory system. Repeated exposure may cause skin dryness and cracking. Vapour may cause drowsiness and dizziness.
Safety - S16, 29, 33, 38, 24/25, 37/39
Keep container in a well ventilated place. Keep away from sources of ignition – No smoking. Avoid contact with eyes. Take precautionary measures against static discharges.
If swallowed, do NOT induce vomiting. Give a glass of water. If in eyes, hold eyes open, food with water for at least 15 minutes and see a doctor. If skin contact occurs, soak contaminated clothing with water & then remove. Wash skin with soap & water. If inhaled, remove from contaminated area. For advice contact a Poisons Information Centre in Australia 131 126 or a doctor.
Don protective equipment. Remove sources of ignition. Stop leak if safe to do so. Contain spilled material, absorb on sand or earth and place in properly labelled sealed containers for disposal. Eliminate all sources of ignition – no smoking.
Use foam, dry chemical or carbon dioxide to fight fire. Cool tank/container with water spray.