BLU-GLU Contact Adhesive is a high tack non-flammable adhesive (flammable propellant) which does not contain CFC’s, suitable for bonding a wide variety of materials giving a rapid and strong bonding formation and is economical in use.
BLU-GLU Contact Adhesive was specifically designed for high pressure laminates to various substrates. The adhesive’s high bond strength makes the product suitable to variety of applications using following materials:
BLU-GLU will bond a wide variety of substrates, including wood, metals, rubber, fabric, most plastics, cardboard, polythene and concrete, as well as decorative laminates. It can also be used to bond expanded polystyrene when forming a bond to a different substrate. In this instance the product should be used as a one way stick and only applied to the opposite substrate (do not spray onto the expanded polystyrene).
It is ideal for permanent bonds that require good initial bond strength.
It provides good temperature resistance and if protected from contamination has an open time of several hours.
Always test a small sample of the materials first to ensure the suitability of the product for the application. For instance, some vinyls contain large amounts of plasticizer which, over time, can migrate and soften the bond.
When in doubt, test first.
|Colour:||Straw (Red optional)|
|Base:||Tackified styrenic block|
|Application Method:||Canister Spray|
|Flammability:||Non-Flammable Adhesive with Flammable Propellant|
|Application Temp:||+5° to +35°|
|Heat resistance:||+70° (Stressed Bond)|
|Drying Time:||2-3 minutes|
|% Solids Content||~26-31%|
|Maximum Canister Coverage (17kg):||230m2 (@15g/m2 Dry coat weight)|
|Clean Up:||Solvent Cleaner or white spirit|
|Contains:||U.N. 1593 Methylene Chloride CAS No. 75-09-2|
Shop fitting, kitchen cabinets, furniture, packaging
CANISTER (10kg, 17kg)
|CHEMICAL UNDER PRESSURE, Flammable N.O.S|
|(DICHLOROMETHANE, PETROLEUM GASES, LIQUEFIED)|
|Transport Hazard class||2.1||2.1|